images discovery td4 misfire under load

Although it would be interesting to find out what your turbo is operating at. Vendor Directory. Please like and subscribe for more, and find us on Facebook and Instagram! Not sure what he put in. Just to add a question on the subject. Skip navigation. How do you test the resistance across the injectors. DiagnoseDan 83, views.

  • TD5 hesitation/misfire Land Rover UK Forums
  • Range Rover Loss of Power, Misfire I Have a Range Rover That
  • Misfire under load! Land Rover Forums Land Rover Enthusiast Forum

  • I towed it to my workshop and discovered the turbo bearings had The miss goes on acceleration if i disconnect the maf sensor but is still there. › Home › Land Rover › Discovery II.

    TD5 hesitation/misfire Land Rover UK Forums

    To cut a long story short we cooked our disco and two engines later have sorted the temp problem but have a misfire problem.​ new ht leads, new coil packs, new plugs, new alternator, new battery, new air flow meter.​ Very loud tapping at speed/under load only?
    Log in. Its an injector. The injector harness has been changed for a new one with improved sealing. Forums New posts. You can post now and register later. So bad she thought it was on fire and bailed out with all the kids lol!

    images discovery td4 misfire under load
    RIZ D OR MARSEILLE HORAIRES DES
    This video is unavailable.

    Range Rover Loss of Power, Misfire I Have a Range Rover That

    Posted December 26, Land Rover Discovery 3 or 4? Making a Solenoid Boxer 4 Engine - Duration: Step 1 Checked red plug on ECU, still some oil despite injector harness change, must be residual oil in engine harness, cleaned it out, no improvement Step 2 Checked other end of harness where new injector harness plugs into engine harness, no oil step 3 Removed turbo heat shield and disconnected wastegate actuator rod, found wastegate to be very stiff.

    › › Land Rover Discovery.

    It's a Discovery TD5 E (manual gearbox).

    images discovery td4 misfire under load

    Lower revs or harder acceleration at higher revs don't seem to show it, However, I also realise that a 5 cylinder with a misfire will be less obvious than a 4 cylinder with the. Hi all, Thought it might be helpful to record my misfire problem and solution Discovery II TD5, 80k miles, with a fsh started misfiring under load.
    This feature is not available right now.

    Thanks for any help. Hi guys.

    Misfire under load! Land Rover Forums Land Rover Enthusiast Forum

    A failure will result in an engine no start condition. Ready to burn the car!

    images discovery td4 misfire under load
    Lebron and chris paul
    A spark is delivered simultaneously to 2 cylinders, one on its compression stroke and the other on its exhaust stroke.

    images discovery td4 misfire under load

    Check for contaminated sensor, poor connections, loose terminals, and open or shorted wires. Sounds like it wants to backfire.

    images discovery td4 misfire under load

    The miss goes on acceleration if i disconnect the maf sensor but is still there if i hold the revs up, but you can accelerate through it. Injection timing will either be correct or one revolution out of synchronization. Loading playlists

    Video: Discovery td4 misfire under load Discovery 4 3.0 TDV6 misfire -- Picoscope -- WPS500